Open the case
Press down to put the saw body back, pull gently to take it out. Magnets hold the blades so they won't fall out.
Source: full video at 0:02
★ Step by step
How The Magic Saw works
Step-by-step guide to The Magic Saw with short video clips from the official HanaToolsUSA demo.
Mount the blade in one of three positions
Teeth point toward you for a pull stroke. The middle position is for straight cuts; for curves, right-handed users use the right side, left-handed the left.
Source: full video at 2:05
Grip it right
Two fingers outside the frame and two inside give you better control. Keep a medium, relaxed grip.
Source: full video at 3:00
Cut wood, metal and plastic
The same Magic Saw blade cuts through wood, and even a nail.
Source: full video at 3:58
Score and snap glass or tile
Use a straightedge and the tungsten carbide roller tip with medium, constant pressure in one smooth stroke, then press down to snap.
Source: full video at 4:50
Use the diamond blade for tight curves and holes
For tight curves, square cuts or a hole for a pipe in tile, switch to the diamond blade. Spray water when cutting glass.
Source: full video at 7:56
Thick wood? Use the dual blade
When the frame gets in the way, slide the top piece out and snap on the dual blade, which cuts wood, metal and plastic.
Source: full video at 10:32
¿Prefieres español? Magic Saw Demonstration in Spanish (HanaToolsUSA)